display projection Orthographic
display depthcue off
display shadows off
color Display {Background} white


color change rgb 34 0.60 0.60 0.60
set cartoon_color 34

# color definitions, change them as you please
color change rgb 35 0.00 0.00 0.00
set color_value_from_0_to_10 35
color change rgb 36 0.10 0.10 0.10
set color_value_from_10_to_20 36
color change rgb 37 0.30 0.30 0.30
set color_value_from_20_to_30 37
color change rgb 38 0.60 0.60 0.60
set color_value_from_30_to_40 38
color change rgb 39 0.00 0.00 1.00
set color_value_from_40_to_50 39
color change rgb 40 0.00 0.50 1.00
set color_value_from_50_to_60 40
color change rgb 41 0.00 1.00 0.00
set color_value_from_60_to_70 41
color change rgb 42 1.00 1.00 0.00
set color_value_from_70_to_80 42
color change rgb 43 1.00 0.60 0.00
set color_value_from_80_to_90 43
color change rgb 44 1.00 0.00 0.00
set color_value_from_90_to_100 44

# color definitions, change them as you please
color change rgb 45 0.00 0.00 0.00
set color_num_0 45
color change rgb 46 1.00 0.00 0.00
set color_num_1 46
color change rgb 47 0.00 1.00 0.00
set color_num_2 47
color change rgb 48 0.00 0.00 1.00
set color_num_3 48
color change rgb 49 1.00 1.00 0.00
set color_num_4 49
color change rgb 50 0.00 1.00 1.00
set color_num_5 50
color change rgb 51 1.00 0.00 1.00
set color_num_6 51
color change rgb 52 0.80 1.00 0.00
set color_num_7 52
color change rgb 53 1.00 0.70 0.70
set color_num_8 53
color change rgb 54 1.00 0.70 0.20
set color_num_9 54
color change rgb 55 0.00 0.60 1.00
set color_num_10 55
color change rgb 56 0.54 0.31 0.64
set color_num_11 56
color change rgb 57 1.00 0.50 1.00
set color_num_12 57
color change rgb 58 0.20 0.60 0.20
set color_num_13 58
color change rgb 59 1.00 0.12 0.00
set color_num_14 59
color change rgb 60 1.00 0.24 0.00
set color_num_15 60
color change rgb 61 1.00 0.36 0.00
set color_num_16 61
color change rgb 62 1.00 0.48 0.00
set color_num_17 62
color change rgb 63 1.00 0.60 0.00
set color_num_18 63
color change rgb 64 1.00 0.72 0.00
set color_num_19 64
color change rgb 65 1.00 0.84 0.00
set color_num_20 65
color change rgb 66 1.00 0.96 0.00
set color_num_21 66
color change rgb 67 0.92 1.00 0.00
set color_num_22 67
color change rgb 68 0.80 1.00 0.00
set color_num_23 68
color change rgb 69 0.68 1.00 0.00
set color_num_24 69
color change rgb 70 0.56 1.00 0.00
set color_num_25 70
color change rgb 71 0.44 1.00 0.00
set color_num_26 71
color change rgb 72 0.32 1.00 0.00
set color_num_27 72
color change rgb 73 0.20 1.00 0.00
set color_num_28 73
color change rgb 74 0.08 1.00 0.00
set color_num_29 74
color change rgb 75 0.00 1.00 0.04
set color_num_30 75
color change rgb 76 0.00 1.00 0.16
set color_num_31 76
color change rgb 77 0.00 1.00 0.28
set color_num_32 77
color change rgb 78 0.00 1.00 0.40
set color_num_33 78
color change rgb 79 0.00 1.00 0.52
set color_num_34 79
color change rgb 80 0.00 1.00 0.64
set color_num_35 80
color change rgb 81 0.00 1.00 0.76
set color_num_36 81
color change rgb 82 0.00 1.00 0.88
set color_num_37 82
color change rgb 83 0.00 1.00 1.00
set color_num_38 83
color change rgb 84 0.00 0.88 1.00
set color_num_39 84
color change rgb 85 0.00 0.76 1.00
set color_num_40 85
color change rgb 86 0.00 0.64 1.00
set color_num_41 86
color change rgb 87 0.00 0.52 1.00
set color_num_42 87
color change rgb 88 0.00 0.40 1.00
set color_num_43 88
color change rgb 89 0.00 0.28 1.00
set color_num_44 89
color change rgb 90 0.00 0.16 1.00
set color_num_45 90
color change rgb 91 0.00 0.04 1.00
set color_num_46 91
color change rgb 92 0.08 0.00 1.00
set color_num_47 92
color change rgb 93 0.20 0.00 1.00
set color_num_48 93
color change rgb 94 0.32 0.00 1.00
set color_num_49 94
color change rgb 95 0.44 0.00 1.00
set color_num_50 95
color change rgb 96 0.56 0.00 1.00
set color_num_51 96
color change rgb 97 0.68 0.00 1.00
set color_num_52 97
color change rgb 98 0.80 0.00 1.00
set color_num_53 98
color change rgb 99 0.92 0.00 1.00
set color_num_54 99
color change rgb 100 1.00 0.00 0.96
set color_num_55 100
color change rgb 101 1.00 0.00 0.84
set color_num_56 101
color change rgb 102 1.00 0.00 0.72
set color_num_57 102
color change rgb 103 1.00 0.00 0.60
set color_num_58 103
color change rgb 104 1.00 0.00 0.48
set color_num_59 104
color change rgb 105 1.00 0.00 0.36
set color_num_60 105
color change rgb 106 1.00 0.00 0.24
set color_num_61 106
color change rgb 107 1.00 0.00 0.12
set color_num_62 107

# fixed size radius used for clusters and communities, change them as you please
set link_fixed_size_value 0.6
set node_fixed_size_value 0.95

# link size definitions, change them as you please
set link_size_value_from_0_to_10   0.35
set link_size_value_from_10_to_20  0.40
set link_size_value_from_20_to_30  0.45
set link_size_value_from_30_to_40  0.50
set link_size_value_from_40_to_50  0.55
set link_size_value_from_50_to_60  0.60
set link_size_value_from_60_to_70  0.65
set link_size_value_from_70_to_80  0.70
set link_size_value_from_80_to_90  0.75
set link_size_value_from_90_to_100 0.80

# node size definitions, change them as you please
set node_size_value_from_0_to_10   0.5
set node_size_value_from_10_to_20  0.6
set node_size_value_from_20_to_30  0.7
set node_size_value_from_30_to_40  0.8
set node_size_value_from_40_to_50  0.9
set node_size_value_from_50_to_60  1.0
set node_size_value_from_60_to_70  1.1
set node_size_value_from_70_to_80  1.2
set node_size_value_from_80_to_90  1.3
set node_size_value_from_90_to_100 1.4

# diff colors definitions, change them as you please
color change rgb 108 1.0 0.5 0.0
set net1_items_color 108
color change rgb 109 0.5 1.0 0.0
set shared_items_color 109
color change rgb 110 0.8 0.5 1.0
set net2_items_color 110

# pert colors definitions, change them as you please
color change rgb 111 0.00 0.00 1.00
set color_pert_neg_75_100 111
color change rgb 112 0.00 0.37 1.00
set color_pert_neg_50_75 112
color change rgb 113 0.00 0.75 1.00
set color_pert_neg_25_50 113
color change rgb 114 0.00 1.00 1.00
set color_pert_neg_0_25 114
color change rgb 115 1.00 1.00 1.00
set color_pert_zero 115
color change rgb 116 1.00 0.00 0.00
set color_pert_pos_75_100 116
color change rgb 117 1.00 0.37 0.00
set color_pert_pos_50_75 117
color change rgb 118 1.00 0.75 0.00
set color_pert_pos_25_50 118
color change rgb 119 1.00 1.00 0.00
set color_pert_pos_0_25 119
# consurf colors, change them as you please
set color change rgb 120 0.00, 0.00, 0.00
set color_consurf_0 120
set color change rgb 121 0.06, 0.78, 0.82
set color_consurf_1 121
set color change rgb 122 0.55, 1.00, 1.00
set color_consurf_2 122
set color change rgb 123 0.84, 1.00, 1.00
set color_consurf_3 123
set color change rgb 124 0.92, 1.00, 1.00
set color_consurf_4 124
set color change rgb 125 1.00, 1.00, 1.00
set color_consurf_5 125
set color change rgb 126 0.99, 0.93, 0.96
set color_consurf_6 126
set color change rgb 127 0.98, 0.79, 0.87
set color_consurf_7 127
set color change rgb 128 0.94, 0.49, 0.67
set color_consurf_8 128
set color change rgb 129 0.63, 0.15, 0.38
set color_consurf_9 129
mol new 7VUH_nogp.pdb type pdb first 0 last -1 step 1 filebonds 1 autobonds 1 waitfor all
mol delrep 0 top
mol representation NewCartoon
mol color ColorID 6
mol selection { all }
mol material Opaque
mol addrep top
mol selupdate 0 top 0
mol colupdate 0 top 0
mol scaleminmax top 0 0.000000 0.000000
mol smoothrep top 0 0
mol drawframes top 0 {now}
mol showrep top 0 1

mol representation Bonds 0.300000 12.000000
mol color ColorID 16
mol selection {not protein}
mol material Opaque
mol addrep top
mol selupdate 1 top 0
mol colupdate 1 top 0
mol scaleminmax top 1 0.000000 0.000000
mol smoothrep top 1 0
mol drawframes top 1 {now}


# link: R:R:I265 R:R:L25
set sele1 [ atomselect top "segname R and chain R and resid 265 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 25 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:G26 R:R:P29
set sele1 [ atomselect top "segname R and chain R and resid 26 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 29 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:P29 R:R:V28
set sele1 [ atomselect top "segname R and chain R and resid 29 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 28 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:D268 R:R:P29
set sele1 [ atomselect top "segname R and chain R and resid 268 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 29 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F90 R:R:V30
set sele1 [ atomselect top "segname R and chain R and resid 90 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 30 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:M272 R:R:Y32
set sele1 [ atomselect top "segname R and chain R and resid 272 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 32 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:L276 R:R:Y32
set sele1 [ atomselect top "segname R and chain R and resid 276 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 32 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:V81 R:R:Y33
set sele1 [ atomselect top "segname R and chain R and resid 81 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F85 R:R:Y33
set sele1 [ atomselect top "segname R and chain R and resid 85 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:M272 R:R:Y33
set sele1 [ atomselect top "segname R and chain R and resid 272 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L275 R:R:Y33
set sele1 [ atomselect top "segname R and chain R and resid 275 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L36 R:R:L77
set sele1 [ atomselect top "segname R and chain R and resid 36 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 77 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L37 R:R:L41
set sele1 [ atomselect top "segname R and chain R and resid 37 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 41 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L37 R:R:L77
set sele1 [ atomselect top "segname R and chain R and resid 37 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 77 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L37 R:R:V81
set sele1 [ atomselect top "segname R and chain R and resid 37 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 81 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F82 R:R:L37
set sele1 [ atomselect top "segname R and chain R and resid 82 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 37 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:L41 R:R:L77
set sele1 [ atomselect top "segname R and chain R and resid 41 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 77 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:A43 R:R:F282
set sele1 [ atomselect top "segname R and chain R and resid 43 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 282 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D73 R:R:N44
set sele1 [ atomselect top "segname R and chain R and resid 73 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 44 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F282 R:R:N44
set sele1 [ atomselect top "segname R and chain R and resid 282 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 44 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I50 R:R:L46
set sele1 [ atomselect top "segname R and chain R and resid 50 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 46 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:F282 R:R:T47
set sele1 [ atomselect top "segname R and chain R and resid 282 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 47 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F292 R:R:I50
set sele1 [ atomselect top "segname R and chain R and resid 292 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 50 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:L51 R:R:L67
set sele1 [ atomselect top "segname R and chain R and resid 51 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 67 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L54 R:R:Y63
set sele1 [ atomselect top "segname R and chain R and resid 54 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:N64 R:R:R57
set sele1 [ atomselect top "segname R and chain R and resid 64 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 57 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:K60 R:R:V62
set sele1 [ atomselect top "segname R and chain R and resid 60 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 62 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:K60 R:R:Y63
set sele1 [ atomselect top "segname R and chain R and resid 60 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:S61 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 61 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:S61 R:R:T145
set sele1 [ atomselect top "segname R and chain R and resid 61 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 145 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:R291 R:R:Y63
set sele1 [ atomselect top "segname R and chain R and resid 291 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:N64 R:R:T145
set sele1 [ atomselect top "segname R and chain R and resid 64 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 145 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:P121 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 121 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:L122 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 122 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:D125 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 125 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:T145 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 145 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:V148 R:R:Y65
set sele1 [ atomselect top "segname R and chain R and resid 148 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:A68 R:R:I118
set sele1 [ atomselect top "segname R and chain R and resid 68 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 118 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I118 R:R:L69
set sele1 [ atomselect top "segname R and chain R and resid 118 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 69 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L69 R:R:T119
set sele1 [ atomselect top "segname R and chain R and resid 69 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 119 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L69 R:R:N281
set sele1 [ atomselect top "segname R and chain R and resid 69 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 281 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:D73 R:R:T278
set sele1 [ atomselect top "segname R and chain R and resid 73 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 278 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:S111 R:R:V76
set sele1 [ atomselect top "segname R and chain R and resid 111 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 76 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:T278 R:R:V76
set sele1 [ atomselect top "segname R and chain R and resid 278 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 76 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L77 R:R:V81
set sele1 [ atomselect top "segname R and chain R and resid 77 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 81 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F78 R:R:F79
set sele1 [ atomselect top "segname R and chain R and resid 78 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 79 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F79 R:R:L107
set sele1 [ atomselect top "segname R and chain R and resid 79 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 107 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D84 R:R:I80
set sele1 [ atomselect top "segname R and chain R and resid 84 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 80 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F85 R:R:I80
set sele1 [ atomselect top "segname R and chain R and resid 85 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 80 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:E108 R:R:I80
set sele1 [ atomselect top "segname R and chain R and resid 108 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 80 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: L:L:?1 R:R:I80
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 80 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:L275 R:R:V81
set sele1 [ atomselect top "segname R and chain R and resid 275 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 81 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F82 R:R:L87
set sele1 [ atomselect top "segname R and chain R and resid 82 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 87 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:I104 R:R:V83
set sele1 [ atomselect top "segname R and chain R and resid 104 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 83 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D84 R:R:E88
set sele1 [ atomselect top "segname R and chain R and resid 84 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 88 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D84 R:R:E108
set sele1 [ atomselect top "segname R and chain R and resid 84 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 108 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F85 R:R:L275
set sele1 [ atomselect top "segname R and chain R and resid 85 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 275 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I91 R:R:L87
set sele1 [ atomselect top "segname R and chain R and resid 91 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 87 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:E88 R:R:Q95
set sele1 [ atomselect top "segname R and chain R and resid 88 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 95 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D89 R:R:F90
set sele1 [ atomselect top "segname R and chain R and resid 89 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 90 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:P100 R:R:Q95
set sele1 [ atomselect top "segname R and chain R and resid 100 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 95 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:D101 R:R:Q95
set sele1 [ atomselect top "segname R and chain R and resid 101 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 95 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:M96 R:R:P100
set sele1 [ atomselect top "segname R and chain R and resid 96 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 100 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:P97 R:R:Q98
set sele1 [ atomselect top "segname R and chain R and resid 97 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 98 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:D101 R:R:P97
set sele1 [ atomselect top "segname R and chain R and resid 101 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 97 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:P100 R:R:V99
set sele1 [ atomselect top "segname R and chain R and resid 100 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 99 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:K102 R:R:Y164
set sele1 [ atomselect top "segname R and chain R and resid 102 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 164 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I103 R:R:Y164
set sele1 [ atomselect top "segname R and chain R and resid 103 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 164 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I104 R:R:L107
set sele1 [ atomselect top "segname R and chain R and resid 104 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 107 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:E105 R:R:F109
set sele1 [ atomselect top "segname R and chain R and resid 105 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 109 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:E105 R:R:W166
set sele1 [ atomselect top "segname R and chain R and resid 105 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:F109 R:R:H113
set sele1 [ atomselect top "segname R and chain R and resid 109 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 113 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F109 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 109 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F109 R:R:W166
set sele1 [ atomselect top "segname R and chain R and resid 109 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: L:L:?1 R:R:F109
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 109 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F157 R:R:S110
set sele1 [ atomselect top "segname R and chain R and resid 157 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 110 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:S110 R:R:S160
set sele1 [ atomselect top "segname R and chain R and resid 110 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 160 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:H113 R:R:I112
set sele1 [ atomselect top "segname R and chain R and resid 113 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 112 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I112 R:R:S115
set sele1 [ atomselect top "segname R and chain R and resid 112 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 115 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:I112 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 112 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: L:L:?1 R:R:I112
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 112 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:H113 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 113 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:H113 R:R:H187
set sele1 [ atomselect top "segname R and chain R and resid 113 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 187 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:H113 R:R:T190
set sele1 [ atomselect top "segname R and chain R and resid 113 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 190 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:T114 R:R:Y153
set sele1 [ atomselect top "segname R and chain R and resid 114 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 153 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:C156 R:R:T114
set sele1 [ atomselect top "segname R and chain R and resid 156 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 114 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:F237 R:R:I116
set sele1 [ atomselect top "segname R and chain R and resid 237 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 116 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:V120 R:R:W117
set sele1 [ atomselect top "segname R and chain R and resid 120 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 117 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:T190 R:R:W117
set sele1 [ atomselect top "segname R and chain R and resid 190 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 117 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:P195 R:R:W117
set sele1 [ atomselect top "segname R and chain R and resid 195 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 117 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F199 R:R:T119
set sele1 [ atomselect top "segname R and chain R and resid 199 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 119 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:N281 R:R:T119
set sele1 [ atomselect top "segname R and chain R and resid 281 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 119 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:P121 R:R:V120
set sele1 [ atomselect top "segname R and chain R and resid 121 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 120 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I198 R:R:V120
set sele1 [ atomselect top "segname R and chain R and resid 198 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 120 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:P121 R:R:V148
set sele1 [ atomselect top "segname R and chain R and resid 121 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 148 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:R126 R:R:T123
set sele1 [ atomselect top "segname R and chain R and resid 126 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 123 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:F199 R:R:T123
set sele1 [ atomselect top "segname R and chain R and resid 199 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 123 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:D125 R:R:Y136
set sele1 [ atomselect top "segname R and chain R and resid 125 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:D125 R:R:S140
set sele1 [ atomselect top "segname R and chain R and resid 125 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 140 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:C131 R:R:Y127
set sele1 [ atomselect top "segname R and chain R and resid 131 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 127 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:L202 R:R:Y127
set sele1 [ atomselect top "segname R and chain R and resid 202 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 127 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I205 R:R:Y127
set sele1 [ atomselect top "segname R and chain R and resid 205 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 127 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I206 R:R:Y127
set sele1 [ atomselect top "segname R and chain R and resid 206 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 127 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:I128 R:R:Y136
set sele1 [ atomselect top "segname R and chain R and resid 128 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:A129 R:R:Y136
set sele1 [ atomselect top "segname R and chain R and resid 129 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:C131 R:R:H132
set sele1 [ atomselect top "segname R and chain R and resid 131 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 132 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:H137 R:R:Y136
set sele1 [ atomselect top "segname R and chain R and resid 137 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:S140 R:R:Y136
set sele1 [ atomselect top "segname R and chain R and resid 140 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:R144 R:R:Y141
set sele1 [ atomselect top "segname R and chain R and resid 144 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 141 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I149 R:R:R146
set sele1 [ atomselect top "segname R and chain R and resid 149 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 146 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:S160 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 160 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L183 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 183 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:H187 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 187 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:V179 R:R:W165
set sele1 [ atomselect top "segname R and chain R and resid 179 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 165 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:P167 R:R:W166
set sele1 [ atomselect top "segname R and chain R and resid 167 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:L183 R:R:W166
set sele1 [ atomselect top "segname R and chain R and resid 183 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:R244 R:R:W166
set sele1 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: L:L:?1 R:R:W166
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:P167 R:R:Y174
set sele1 [ atomselect top "segname R and chain R and resid 167 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 174 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:H180 R:R:P167
set sele1 [ atomselect top "segname R and chain R and resid 180 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 167 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:N168 R:R:T171
set sele1 [ atomselect top "segname R and chain R and resid 168 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 171 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I169 R:R:W170
set sele1 [ atomselect top "segname R and chain R and resid 169 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 170 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I169 R:R:Y174
set sele1 [ atomselect top "segname R and chain R and resid 169 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 174 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:H251 R:R:I169
set sele1 [ atomselect top "segname R and chain R and resid 251 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 169 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: L:L:?1 R:R:I169
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 169 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:V263 R:R:W170
set sele1 [ atomselect top "segname R and chain R and resid 263 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 170 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:H264 R:R:W170
set sele1 [ atomselect top "segname R and chain R and resid 264 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 170 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:S176 R:R:Y174
set sele1 [ atomselect top "segname R and chain R and resid 176 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 174 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:H181 R:R:S176
set sele1 [ atomselect top "segname R and chain R and resid 181 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 176 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:H180 R:R:T177
set sele1 [ atomselect top "segname R and chain R and resid 180 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 177 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:H180 R:R:V179
set sele1 [ atomselect top "segname R and chain R and resid 180 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 179 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:H181 R:R:L252
set sele1 [ atomselect top "segname R and chain R and resid 181 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 252 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:I184 R:R:L252
set sele1 [ atomselect top "segname R and chain R and resid 184 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 252 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L249 R:R:W185
set sele1 [ atomselect top "segname R and chain R and resid 249 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 185 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:L252 R:R:W185
set sele1 [ atomselect top "segname R and chain R and resid 252 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 185 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:H187 R:R:V191
set sele1 [ atomselect top "segname R and chain R and resid 187 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 191 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:H187 R:R:R244
set sele1 [ atomselect top "segname R and chain R and resid 187 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:C188 R:R:I245
set sele1 [ atomselect top "segname R and chain R and resid 188 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 245 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:C188 R:R:L249
set sele1 [ atomselect top "segname R and chain R and resid 188 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 249 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:F189 R:R:L193
set sele1 [ atomselect top "segname R and chain R and resid 189 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 193 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:V191 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 191 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:C196 R:R:Y192
set sele1 [ atomselect top "segname R and chain R and resid 196 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 192 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:A238 R:R:Y192
set sele1 [ atomselect top "segname R and chain R and resid 238 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 192 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:A242 R:R:Y192
set sele1 [ atomselect top "segname R and chain R and resid 242 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 192 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I245 R:R:Y192
set sele1 [ atomselect top "segname R and chain R and resid 245 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 192 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:P195 R:R:V194
set sele1 [ atomselect top "segname R and chain R and resid 195 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 194 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:F199 R:R:T234
set sele1 [ atomselect top "segname R and chain R and resid 199 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 234 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F199 R:R:F237
set sele1 [ atomselect top "segname R and chain R and resid 199 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 237 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F200 R:R:T234
set sele1 [ atomselect top "segname R and chain R and resid 200 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 234 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:L230 R:R:N203
set sele1 [ atomselect top "segname R and chain R and resid 230 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 203 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:N203 R:R:T234
set sele1 [ atomselect top "segname R and chain R and resid 203 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 234 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:I206 R:R:L230
set sele1 [ atomselect top "segname R and chain R and resid 206 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 230 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:T227 R:R:V207
set sele1 [ atomselect top "segname R and chain R and resid 227 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 207 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:R212 R:R:Y208
set sele1 [ atomselect top "segname R and chain R and resid 212 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 208 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:K209 R:R:K213
set sele1 [ atomselect top "segname R and chain R and resid 209 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 213 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:R211 R:R:R212
set sele1 [ atomselect top "segname R and chain R and resid 211 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 212 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:R217 R:R:S214
set sele1 [ atomselect top "segname R and chain R and resid 217 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 214 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:N215 R:R:R219
set sele1 [ atomselect top "segname R and chain R and resid 215 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 219 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:F216 R:R:L218
set sele1 [ atomselect top "segname R and chain R and resid 216 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 218 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:R219 R:R:S222
set sele1 [ atomselect top "segname R and chain R and resid 219 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 222 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:G224 R:R:T223
set sele1 [ atomselect top "segname R and chain R and resid 224 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 223 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:F231 R:R:S235
set sele1 [ atomselect top "segname R and chain R and resid 231 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 235 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I233 R:R:L284
set sele1 [ atomselect top "segname R and chain R and resid 233 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 284 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I233 R:R:Y285
set sele1 [ atomselect top "segname R and chain R and resid 233 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 285 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I236 R:R:L240
set sele1 [ atomselect top "segname R and chain R and resid 236 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 240 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I236 R:R:I280
set sele1 [ atomselect top "segname R and chain R and resid 236 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 280 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:F237 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 237 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:F237 R:R:N277
set sele1 [ atomselect top "segname R and chain R and resid 237 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 277 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_80_to_90 resolution 60 filled yes

# link: R:R:L240 R:R:L273
set sele1 [ atomselect top "segname R and chain R and resid 240 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 273 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L240 R:R:L276
set sele1 [ atomselect top "segname R and chain R and resid 240 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 276 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:L240 R:R:N277
set sele1 [ atomselect top "segname R and chain R and resid 240 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 277 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:R244 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:A274 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 274 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:N277 R:R:W241
set sele1 [ atomselect top "segname R and chain R and resid 277 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: L:L:?1 R:R:W241
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:A270 R:R:P243
set sele1 [ atomselect top "segname R and chain R and resid 270 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 243 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:L273 R:R:P243
set sele1 [ atomselect top "segname R and chain R and resid 273 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 243 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:I248 R:R:R244
set sele1 [ atomselect top "segname R and chain R and resid 248 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:N271 R:R:R244
set sele1 [ atomselect top "segname R and chain R and resid 271 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: L:L:?1 R:R:R244
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 244 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:M247 R:R:V263
set sele1 [ atomselect top "segname R and chain R and resid 247 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 263 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:M247 R:R:M266
set sele1 [ atomselect top "segname R and chain R and resid 247 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 266 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: L:L:?1 R:R:I248
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 248 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:G254 R:R:Y250
set sele1 [ atomselect top "segname R and chain R and resid 254 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 250 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:A255 R:R:Y250
set sele1 [ atomselect top "segname R and chain R and resid 255 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 250 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:H251 R:R:N259
set sele1 [ atomselect top "segname R and chain R and resid 251 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 259 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: L:L:?1 R:R:H251
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 251 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:A255 R:R:N259
set sele1 [ atomselect top "segname R and chain R and resid 255 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 259 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:R260 R:R:W261
set sele1 [ atomselect top "segname R and chain R and resid 260 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 261 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: L:L:?1 R:R:S267
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 267 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: L:L:?1 R:R:N271
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 271 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: L:L:?1 R:R:L275
set sele1 [ atomselect top "segname L and chain L and resid 1 and name O2" ]
set sele2 [ atomselect top "segname R and chain R and resid 275 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_70_to_80 resolution 60 filled yes

# link: R:R:F283 R:R:I280
set sele1 [ atomselect top "segname R and chain R and resid 283 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 280 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I280 R:R:L284
set sele1 [ atomselect top "segname R and chain R and resid 280 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 284 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:N281 R:R:Y285
set sele1 [ atomselect top "segname R and chain R and resid 281 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 285 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F282 R:R:F283
set sele1 [ atomselect top "segname R and chain R and resid 282 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 283 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:C286 R:R:F282
set sele1 [ atomselect top "segname R and chain R and resid 286 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 282 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:F283 R:R:F287
set sele1 [ atomselect top "segname R and chain R and resid 283 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 287 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_40_to_50 resolution 60 filled yes

# link: R:R:C286 R:R:F292
set sele1 [ atomselect top "segname R and chain R and resid 286 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 292 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_90_to_100 resolution 60 filled yes

# link: R:R:F287 R:R:R293
set sele1 [ atomselect top "segname R and chain R and resid 287 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 293 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:R291 R:R:S289
set sele1 [ atomselect top "segname R and chain R and resid 291 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 289 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:K290 R:R:R293
set sele1 [ atomselect top "segname R and chain R and resid 290 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 293 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:F304 R:R:K301
set sele1 [ atomselect top "segname R and chain R and resid 304 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 301 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_60_to_70 resolution 60 filled yes

# link: R:R:F303 R:R:F304
set sele1 [ atomselect top "segname R and chain R and resid 303 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 304 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_50_to_60 resolution 60 filled yes

# link: R:R:L51 R:R:Y63
set sele1 [ atomselect top "segname R and chain R and resid 51 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:L66 R:R:Y285
set sele1 [ atomselect top "segname R and chain R and resid 66 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 285 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:E108 R:R:F79
set sele1 [ atomselect top "segname R and chain R and resid 108 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 79 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:C156 R:R:S110
set sele1 [ atomselect top "segname R and chain R and resid 156 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 110 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I161 R:R:P162
set sele1 [ atomselect top "segname R and chain R and resid 161 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 162 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I257 R:R:P256
set sele1 [ atomselect top "segname R and chain R and resid 257 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 256 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_1
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:A70 R:R:T47
set sele1 [ atomselect top "segname R and chain R and resid 70 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 47 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:A72 R:R:T114
set sele1 [ atomselect top "segname R and chain R and resid 72 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 114 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:A68 R:R:I149
set sele1 [ atomselect top "segname R and chain R and resid 68 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 149 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:C131 R:R:K209
set sele1 [ atomselect top "segname R and chain R and resid 131 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 209 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:S197 R:R:V194
set sele1 [ atomselect top "segname R and chain R and resid 197 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 194 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:T138 R:R:V139
set sele1 [ atomselect top "segname R and chain R and resid 138 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 139 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:T155 R:R:T159
set sele1 [ atomselect top "segname R and chain R and resid 155 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 159 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:T223 R:R:T227
set sele1 [ atomselect top "segname R and chain R and resid 223 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 227 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I118 R:R:V152
set sele1 [ atomselect top "segname R and chain R and resid 118 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 152 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I206 R:R:V130
set sele1 [ atomselect top "segname R and chain R and resid 206 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 130 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I50 R:R:T299
set sele1 [ atomselect top "segname R and chain R and resid 50 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 299 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:I236 R:R:T239
set sele1 [ atomselect top "segname R and chain R and resid 236 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 239 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:M295 R:R:T294
set sele1 [ atomselect top "segname R and chain R and resid 295 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 294 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_30_to_40 resolution 60 filled yes

# link: R:R:L35 R:R:V31
set sele1 [ atomselect top "segname R and chain R and resid 35 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 31 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:L210 R:R:V130
set sele1 [ atomselect top "segname R and chain R and resid 210 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 130 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I201 R:R:I205
set sele1 [ atomselect top "segname R and chain R and resid 201 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 205 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I229 R:R:I233
set sele1 [ atomselect top "segname R and chain R and resid 229 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 233 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:W165 R:R:Y164
set sele1 [ atomselect top "segname R and chain R and resid 165 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 164 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I91 R:R:L92
set sele1 [ atomselect top "segname R and chain R and resid 91 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 92 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I124 R:R:L202
set sele1 [ atomselect top "segname R and chain R and resid 124 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 202 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I74 R:R:N44
set sele1 [ atomselect top "segname R and chain R and resid 74 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 44 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:L262 R:R:M266
set sele1 [ atomselect top "segname R and chain R and resid 262 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 266 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:K301 R:R:L300
set sele1 [ atomselect top "segname R and chain R and resid 301 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 300 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:P29 R:R:Y33
set sele1 [ atomselect top "segname R and chain R and resid 29 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:L37 R:R:L86
set sele1 [ atomselect top "segname R and chain R and resid 37 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 86 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:D101 R:R:N168
set sele1 [ atomselect top "segname R and chain R and resid 101 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 168 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:A56 R:R:Y63
set sele1 [ atomselect top "segname R and chain R and resid 56 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:A143 R:R:Y141
set sele1 [ atomselect top "segname R and chain R and resid 143 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 141 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:F292 R:R:S289
set sele1 [ atomselect top "segname R and chain R and resid 292 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 289 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:R58 R:R:V55
set sele1 [ atomselect top "segname R and chain R and resid 58 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 55 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:R211 R:R:T223
set sele1 [ atomselect top "segname R and chain R and resid 211 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 223 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:F157 R:R:L75
set sele1 [ atomselect top "segname R and chain R and resid 157 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 75 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:I186 R:R:Y163
set sele1 [ atomselect top "segname R and chain R and resid 186 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:L249 R:R:Y253
set sele1 [ atomselect top "segname R and chain R and resid 249 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 253 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:L252 R:R:Y253
set sele1 [ atomselect top "segname R and chain R and resid 252 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 253 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:F216 R:R:R219
set sele1 [ atomselect top "segname R and chain R and resid 216 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 219 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:R57 R:R:R58
set sele1 [ atomselect top "segname R and chain R and resid 57 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 58 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:G40 R:R:P42
set sele1 [ atomselect top "segname R and chain R and resid 40 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 42 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_20_to_30 resolution 60 filled yes

# link: R:R:A43 R:R:G40
set sele1 [ atomselect top "segname R and chain R and resid 43 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 40 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_9
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A228 R:R:G224
set sele1 [ atomselect top "segname R and chain R and resid 228 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 224 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A255 R:R:P256
set sele1 [ atomselect top "segname R and chain R and resid 255 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 256 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_1
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:G26 R:R:L25
set sele1 [ atomselect top "segname R and chain R and resid 26 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 25 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A70 R:R:V48
set sele1 [ atomselect top "segname R and chain R and resid 70 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 48 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:C156 R:R:T155
set sele1 [ atomselect top "segname R and chain R and resid 156 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 155 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A302 R:R:T299
set sele1 [ atomselect top "segname R and chain R and resid 302 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 299 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L183 R:R:P162
set sele1 [ atomselect top "segname R and chain R and resid 183 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 162 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:N64 R:R:P142
set sele1 [ atomselect top "segname R and chain R and resid 64 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 142 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:S52 R:R:V48
set sele1 [ atomselect top "segname R and chain R and resid 52 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 48 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A296 R:R:I50
set sele1 [ atomselect top "segname R and chain R and resid 296 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 50 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:S151 R:R:V148
set sele1 [ atomselect top "segname R and chain R and resid 151 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 148 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:S151 R:R:V152
set sele1 [ atomselect top "segname R and chain R and resid 151 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 152 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:S222 R:R:T223
set sele1 [ atomselect top "segname R and chain R and resid 222 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 223 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:C23 R:R:L25
set sele1 [ atomselect top "segname R and chain R and resid 23 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 25 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A279 R:R:L36
set sele1 [ atomselect top "segname R and chain R and resid 279 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 36 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I205 R:R:S204
set sele1 [ atomselect top "segname R and chain R and resid 205 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 204 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I161 R:R:V106
set sele1 [ atomselect top "segname R and chain R and resid 161 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 106 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I128 R:R:V139
set sele1 [ atomselect top "segname R and chain R and resid 128 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 139 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I149 R:R:V150
set sele1 [ atomselect top "segname R and chain R and resid 149 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 150 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I186 R:R:V182
set sele1 [ atomselect top "segname R and chain R and resid 186 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 182 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:H132 R:R:P133
set sele1 [ atomselect top "segname R and chain R and resid 132 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 133 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:K147 R:R:S151
set sele1 [ atomselect top "segname R and chain R and resid 147 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 151 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:F27 R:R:G24
set sele1 [ atomselect top "segname R and chain R and resid 27 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 24 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:F90 R:R:G26
set sele1 [ atomselect top "segname R and chain R and resid 90 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 26 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L86 R:R:S34
set sele1 [ atomselect top "segname R and chain R and resid 86 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 34 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L230 R:R:V207
set sele1 [ atomselect top "segname R and chain R and resid 230 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 207 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I45 R:R:I49
set sele1 [ atomselect top "segname R and chain R and resid 45 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 49 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I45 R:R:I74
set sele1 [ atomselect top "segname R and chain R and resid 45 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 74 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L158 R:R:T159
set sele1 [ atomselect top "segname R and chain R and resid 158 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 159 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L210 R:R:T226
set sele1 [ atomselect top "segname R and chain R and resid 210 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 226 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I229 R:R:I288
set sele1 [ atomselect top "segname R and chain R and resid 229 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 288 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I265 R:R:I269
set sele1 [ atomselect top "segname R and chain R and resid 265 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 269 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_4
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I229 R:R:K225
set sele1 [ atomselect top "segname R and chain R and resid 229 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 225 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_8
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:E172 R:R:T171
set sele1 [ atomselect top "segname R and chain R and resid 172 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 171 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_3
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:P142 R:R:Y141
set sele1 [ atomselect top "segname R and chain R and resid 142 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 141 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:I49 R:R:Q53
set sele1 [ atomselect top "segname R and chain R and resid 49 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 53 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:A71 R:R:Y153
set sele1 [ atomselect top "segname R and chain R and resid 71 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 153 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:F189 R:R:V194
set sele1 [ atomselect top "segname R and chain R and resid 189 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 194 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:R291 R:R:T294
set sele1 [ atomselect top "segname R and chain R and resid 291 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 294 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_6
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:N215 R:R:R217
set sele1 [ atomselect top "segname R and chain R and resid 215 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 217 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:L218 R:R:R217
set sele1 [ atomselect top "segname R and chain R and resid 218 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 217 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_5
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:N259 R:R:R260
set sele1 [ atomselect top "segname R and chain R and resid 259 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 260 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_2
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# link: R:R:Q59 R:R:R58
set sele1 [ atomselect top "segname R and chain R and resid 59 and name CA" ]
set sele2 [ atomselect top "segname R and chain R and resid 58 and name CA" ]
lassign [$sele1 get {x y z}] pos1
lassign [$sele2 get {x y z}] pos2
draw color $color_consurf_7
graphics top cylinder $pos1 $pos2 radius $link_size_value_from_10_to_20 resolution 60 filled yes

# node: R:R:I265
set sele [ atomselect top "segname R and chain R and resid 265 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L25
set sele [ atomselect top "segname R and chain R and resid 25 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:G26
set sele [ atomselect top "segname R and chain R and resid 26 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:P29
set sele [ atomselect top "segname R and chain R and resid 29 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:V28
set sele [ atomselect top "segname R and chain R and resid 28 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:D268
set sele [ atomselect top "segname R and chain R and resid 268 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F90
set sele [ atomselect top "segname R and chain R and resid 90 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:V30
set sele [ atomselect top "segname R and chain R and resid 30 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:M272
set sele [ atomselect top "segname R and chain R and resid 272 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:Y32
set sele [ atomselect top "segname R and chain R and resid 32 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:L276
set sele [ atomselect top "segname R and chain R and resid 276 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:V81
set sele [ atomselect top "segname R and chain R and resid 81 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:Y33
set sele [ atomselect top "segname R and chain R and resid 33 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:F85
set sele [ atomselect top "segname R and chain R and resid 85 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L275
set sele [ atomselect top "segname R and chain R and resid 275 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L36
set sele [ atomselect top "segname R and chain R and resid 36 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L77
set sele [ atomselect top "segname R and chain R and resid 77 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L37
set sele [ atomselect top "segname R and chain R and resid 37 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L41
set sele [ atomselect top "segname R and chain R and resid 41 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:F82
set sele [ atomselect top "segname R and chain R and resid 82 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:A43
set sele [ atomselect top "segname R and chain R and resid 43 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F282
set sele [ atomselect top "segname R and chain R and resid 282 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:D73
set sele [ atomselect top "segname R and chain R and resid 73 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:N44
set sele [ atomselect top "segname R and chain R and resid 44 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I50
set sele [ atomselect top "segname R and chain R and resid 50 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:L46
set sele [ atomselect top "segname R and chain R and resid 46 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:T47
set sele [ atomselect top "segname R and chain R and resid 47 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F292
set sele [ atomselect top "segname R and chain R and resid 292 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L51
set sele [ atomselect top "segname R and chain R and resid 51 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L67
set sele [ atomselect top "segname R and chain R and resid 67 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L54
set sele [ atomselect top "segname R and chain R and resid 54 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y63
set sele [ atomselect top "segname R and chain R and resid 63 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:N64
set sele [ atomselect top "segname R and chain R and resid 64 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:R57
set sele [ atomselect top "segname R and chain R and resid 57 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:K60
set sele [ atomselect top "segname R and chain R and resid 60 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:V62
set sele [ atomselect top "segname R and chain R and resid 62 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:S61
set sele [ atomselect top "segname R and chain R and resid 61 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y65
set sele [ atomselect top "segname R and chain R and resid 65 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:T145
set sele [ atomselect top "segname R and chain R and resid 145 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:R291
set sele [ atomselect top "segname R and chain R and resid 291 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:P121
set sele [ atomselect top "segname R and chain R and resid 121 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L122
set sele [ atomselect top "segname R and chain R and resid 122 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:D125
set sele [ atomselect top "segname R and chain R and resid 125 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:V148
set sele [ atomselect top "segname R and chain R and resid 148 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:A68
set sele [ atomselect top "segname R and chain R and resid 68 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:I118
set sele [ atomselect top "segname R and chain R and resid 118 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L69
set sele [ atomselect top "segname R and chain R and resid 69 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:T119
set sele [ atomselect top "segname R and chain R and resid 119 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:N281
set sele [ atomselect top "segname R and chain R and resid 281 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:T278
set sele [ atomselect top "segname R and chain R and resid 278 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:S111
set sele [ atomselect top "segname R and chain R and resid 111 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:V76
set sele [ atomselect top "segname R and chain R and resid 76 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F78
set sele [ atomselect top "segname R and chain R and resid 78 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F79
set sele [ atomselect top "segname R and chain R and resid 79 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L107
set sele [ atomselect top "segname R and chain R and resid 107 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:D84
set sele [ atomselect top "segname R and chain R and resid 84 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:I80
set sele [ atomselect top "segname R and chain R and resid 80 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:E108
set sele [ atomselect top "segname R and chain R and resid 108 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: L:L:?1
set sele [ atomselect top "segname L and chain L and resid 1 and name O2" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_0
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L87
set sele [ atomselect top "segname R and chain R and resid 87 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:I104
set sele [ atomselect top "segname R and chain R and resid 104 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:V83
set sele [ atomselect top "segname R and chain R and resid 83 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:E88
set sele [ atomselect top "segname R and chain R and resid 88 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I91
set sele [ atomselect top "segname R and chain R and resid 91 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:Q95
set sele [ atomselect top "segname R and chain R and resid 95 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:D89
set sele [ atomselect top "segname R and chain R and resid 89 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:P100
set sele [ atomselect top "segname R and chain R and resid 100 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:D101
set sele [ atomselect top "segname R and chain R and resid 101 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:M96
set sele [ atomselect top "segname R and chain R and resid 96 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:P97
set sele [ atomselect top "segname R and chain R and resid 97 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:Q98
set sele [ atomselect top "segname R and chain R and resid 98 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:V99
set sele [ atomselect top "segname R and chain R and resid 99 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:K102
set sele [ atomselect top "segname R and chain R and resid 102 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y164
set sele [ atomselect top "segname R and chain R and resid 164 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I103
set sele [ atomselect top "segname R and chain R and resid 103 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:E105
set sele [ atomselect top "segname R and chain R and resid 105 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:F109
set sele [ atomselect top "segname R and chain R and resid 109 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:W166
set sele [ atomselect top "segname R and chain R and resid 166 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:H113
set sele [ atomselect top "segname R and chain R and resid 113 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:Y163
set sele [ atomselect top "segname R and chain R and resid 163 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:F157
set sele [ atomselect top "segname R and chain R and resid 157 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:S110
set sele [ atomselect top "segname R and chain R and resid 110 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:S160
set sele [ atomselect top "segname R and chain R and resid 160 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:I112
set sele [ atomselect top "segname R and chain R and resid 112 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:S115
set sele [ atomselect top "segname R and chain R and resid 115 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:W241
set sele [ atomselect top "segname R and chain R and resid 241 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:H187
set sele [ atomselect top "segname R and chain R and resid 187 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:T190
set sele [ atomselect top "segname R and chain R and resid 190 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:T114
set sele [ atomselect top "segname R and chain R and resid 114 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:Y153
set sele [ atomselect top "segname R and chain R and resid 153 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:C156
set sele [ atomselect top "segname R and chain R and resid 156 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:F237
set sele [ atomselect top "segname R and chain R and resid 237 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I116
set sele [ atomselect top "segname R and chain R and resid 116 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:V120
set sele [ atomselect top "segname R and chain R and resid 120 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:W117
set sele [ atomselect top "segname R and chain R and resid 117 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:P195
set sele [ atomselect top "segname R and chain R and resid 195 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F199
set sele [ atomselect top "segname R and chain R and resid 199 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I198
set sele [ atomselect top "segname R and chain R and resid 198 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:R126
set sele [ atomselect top "segname R and chain R and resid 126 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:T123
set sele [ atomselect top "segname R and chain R and resid 123 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:Y136
set sele [ atomselect top "segname R and chain R and resid 136 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:S140
set sele [ atomselect top "segname R and chain R and resid 140 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:C131
set sele [ atomselect top "segname R and chain R and resid 131 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:Y127
set sele [ atomselect top "segname R and chain R and resid 127 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L202
set sele [ atomselect top "segname R and chain R and resid 202 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:I205
set sele [ atomselect top "segname R and chain R and resid 205 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:I206
set sele [ atomselect top "segname R and chain R and resid 206 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I128
set sele [ atomselect top "segname R and chain R and resid 128 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:A129
set sele [ atomselect top "segname R and chain R and resid 129 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:H132
set sele [ atomselect top "segname R and chain R and resid 132 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:H137
set sele [ atomselect top "segname R and chain R and resid 137 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:R144
set sele [ atomselect top "segname R and chain R and resid 144 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y141
set sele [ atomselect top "segname R and chain R and resid 141 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I149
set sele [ atomselect top "segname R and chain R and resid 149 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:R146
set sele [ atomselect top "segname R and chain R and resid 146 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L183
set sele [ atomselect top "segname R and chain R and resid 183 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:V179
set sele [ atomselect top "segname R and chain R and resid 179 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:W165
set sele [ atomselect top "segname R and chain R and resid 165 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:P167
set sele [ atomselect top "segname R and chain R and resid 167 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:R244
set sele [ atomselect top "segname R and chain R and resid 244 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y174
set sele [ atomselect top "segname R and chain R and resid 174 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:H180
set sele [ atomselect top "segname R and chain R and resid 180 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:N168
set sele [ atomselect top "segname R and chain R and resid 168 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:T171
set sele [ atomselect top "segname R and chain R and resid 171 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I169
set sele [ atomselect top "segname R and chain R and resid 169 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:W170
set sele [ atomselect top "segname R and chain R and resid 170 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:H251
set sele [ atomselect top "segname R and chain R and resid 251 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:V263
set sele [ atomselect top "segname R and chain R and resid 263 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:H264
set sele [ atomselect top "segname R and chain R and resid 264 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:S176
set sele [ atomselect top "segname R and chain R and resid 176 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:H181
set sele [ atomselect top "segname R and chain R and resid 181 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:T177
set sele [ atomselect top "segname R and chain R and resid 177 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L252
set sele [ atomselect top "segname R and chain R and resid 252 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:I184
set sele [ atomselect top "segname R and chain R and resid 184 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L249
set sele [ atomselect top "segname R and chain R and resid 249 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:W185
set sele [ atomselect top "segname R and chain R and resid 185 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:V191
set sele [ atomselect top "segname R and chain R and resid 191 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:C188
set sele [ atomselect top "segname R and chain R and resid 188 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:I245
set sele [ atomselect top "segname R and chain R and resid 245 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:F189
set sele [ atomselect top "segname R and chain R and resid 189 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L193
set sele [ atomselect top "segname R and chain R and resid 193 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:C196
set sele [ atomselect top "segname R and chain R and resid 196 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:Y192
set sele [ atomselect top "segname R and chain R and resid 192 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:A238
set sele [ atomselect top "segname R and chain R and resid 238 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:A242
set sele [ atomselect top "segname R and chain R and resid 242 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:V194
set sele [ atomselect top "segname R and chain R and resid 194 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:T234
set sele [ atomselect top "segname R and chain R and resid 234 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_80_to_90 resolution 60

# node: R:R:F200
set sele [ atomselect top "segname R and chain R and resid 200 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:L230
set sele [ atomselect top "segname R and chain R and resid 230 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:N203
set sele [ atomselect top "segname R and chain R and resid 203 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:T227
set sele [ atomselect top "segname R and chain R and resid 227 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:V207
set sele [ atomselect top "segname R and chain R and resid 207 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:R212
set sele [ atomselect top "segname R and chain R and resid 212 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:Y208
set sele [ atomselect top "segname R and chain R and resid 208 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:K209
set sele [ atomselect top "segname R and chain R and resid 209 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:K213
set sele [ atomselect top "segname R and chain R and resid 213 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:R211
set sele [ atomselect top "segname R and chain R and resid 211 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:R217
set sele [ atomselect top "segname R and chain R and resid 217 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:S214
set sele [ atomselect top "segname R and chain R and resid 214 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:N215
set sele [ atomselect top "segname R and chain R and resid 215 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:R219
set sele [ atomselect top "segname R and chain R and resid 219 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:F216
set sele [ atomselect top "segname R and chain R and resid 216 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L218
set sele [ atomselect top "segname R and chain R and resid 218 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:S222
set sele [ atomselect top "segname R and chain R and resid 222 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:G224
set sele [ atomselect top "segname R and chain R and resid 224 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:T223
set sele [ atomselect top "segname R and chain R and resid 223 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:F231
set sele [ atomselect top "segname R and chain R and resid 231 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:S235
set sele [ atomselect top "segname R and chain R and resid 235 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:I233
set sele [ atomselect top "segname R and chain R and resid 233 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:L284
set sele [ atomselect top "segname R and chain R and resid 284 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:Y285
set sele [ atomselect top "segname R and chain R and resid 285 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:I236
set sele [ atomselect top "segname R and chain R and resid 236 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:L240
set sele [ atomselect top "segname R and chain R and resid 240 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:I280
set sele [ atomselect top "segname R and chain R and resid 280 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:N277
set sele [ atomselect top "segname R and chain R and resid 277 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:L273
set sele [ atomselect top "segname R and chain R and resid 273 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:A274
set sele [ atomselect top "segname R and chain R and resid 274 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:A270
set sele [ atomselect top "segname R and chain R and resid 270 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:P243
set sele [ atomselect top "segname R and chain R and resid 243 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:I248
set sele [ atomselect top "segname R and chain R and resid 248 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:N271
set sele [ atomselect top "segname R and chain R and resid 271 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:M247
set sele [ atomselect top "segname R and chain R and resid 247 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:M266
set sele [ atomselect top "segname R and chain R and resid 266 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:G254
set sele [ atomselect top "segname R and chain R and resid 254 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:Y250
set sele [ atomselect top "segname R and chain R and resid 250 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:A255
set sele [ atomselect top "segname R and chain R and resid 255 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:N259
set sele [ atomselect top "segname R and chain R and resid 259 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:R260
set sele [ atomselect top "segname R and chain R and resid 260 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:W261
set sele [ atomselect top "segname R and chain R and resid 261 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_70_to_80 resolution 60

# node: R:R:S267
set sele [ atomselect top "segname R and chain R and resid 267 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:F283
set sele [ atomselect top "segname R and chain R and resid 283 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:C286
set sele [ atomselect top "segname R and chain R and resid 286 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_90_to_100 resolution 60

# node: R:R:F287
set sele [ atomselect top "segname R and chain R and resid 287 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:R293
set sele [ atomselect top "segname R and chain R and resid 293 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:S289
set sele [ atomselect top "segname R and chain R and resid 289 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:K290
set sele [ atomselect top "segname R and chain R and resid 290 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_60_to_70 resolution 60

# node: R:R:F304
set sele [ atomselect top "segname R and chain R and resid 304 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:K301
set sele [ atomselect top "segname R and chain R and resid 301 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_40_to_50 resolution 60

# node: R:R:F303
set sele [ atomselect top "segname R and chain R and resid 303 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_50_to_60 resolution 60

# node: R:R:L66
set sele [ atomselect top "segname R and chain R and resid 66 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:I161
set sele [ atomselect top "segname R and chain R and resid 161 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:P162
set sele [ atomselect top "segname R and chain R and resid 162 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I257
set sele [ atomselect top "segname R and chain R and resid 257 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:P256
set sele [ atomselect top "segname R and chain R and resid 256 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_1
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:A70
set sele [ atomselect top "segname R and chain R and resid 70 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:A72
set sele [ atomselect top "segname R and chain R and resid 72 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:S197
set sele [ atomselect top "segname R and chain R and resid 197 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:T138
set sele [ atomselect top "segname R and chain R and resid 138 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:V139
set sele [ atomselect top "segname R and chain R and resid 139 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:T155
set sele [ atomselect top "segname R and chain R and resid 155 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:T159
set sele [ atomselect top "segname R and chain R and resid 159 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:V152
set sele [ atomselect top "segname R and chain R and resid 152 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:V130
set sele [ atomselect top "segname R and chain R and resid 130 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:T299
set sele [ atomselect top "segname R and chain R and resid 299 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:T239
set sele [ atomselect top "segname R and chain R and resid 239 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:M295
set sele [ atomselect top "segname R and chain R and resid 295 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_30_to_40 resolution 60

# node: R:R:T294
set sele [ atomselect top "segname R and chain R and resid 294 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L35
set sele [ atomselect top "segname R and chain R and resid 35 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:V31
set sele [ atomselect top "segname R and chain R and resid 31 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L210
set sele [ atomselect top "segname R and chain R and resid 210 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I201
set sele [ atomselect top "segname R and chain R and resid 201 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I229
set sele [ atomselect top "segname R and chain R and resid 229 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:L92
set sele [ atomselect top "segname R and chain R and resid 92 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I124
set sele [ atomselect top "segname R and chain R and resid 124 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I74
set sele [ atomselect top "segname R and chain R and resid 74 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L262
set sele [ atomselect top "segname R and chain R and resid 262 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L300
set sele [ atomselect top "segname R and chain R and resid 300 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L86
set sele [ atomselect top "segname R and chain R and resid 86 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:A56
set sele [ atomselect top "segname R and chain R and resid 56 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:A143
set sele [ atomselect top "segname R and chain R and resid 143 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:R58
set sele [ atomselect top "segname R and chain R and resid 58 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:V55
set sele [ atomselect top "segname R and chain R and resid 55 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:L75
set sele [ atomselect top "segname R and chain R and resid 75 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:I186
set sele [ atomselect top "segname R and chain R and resid 186 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:Y253
set sele [ atomselect top "segname R and chain R and resid 253 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:G40
set sele [ atomselect top "segname R and chain R and resid 40 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_9
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:P42
set sele [ atomselect top "segname R and chain R and resid 42 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_20_to_30 resolution 60

# node: R:R:A228
set sele [ atomselect top "segname R and chain R and resid 228 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:V48
set sele [ atomselect top "segname R and chain R and resid 48 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:A302
set sele [ atomselect top "segname R and chain R and resid 302 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:P142
set sele [ atomselect top "segname R and chain R and resid 142 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:S52
set sele [ atomselect top "segname R and chain R and resid 52 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:A296
set sele [ atomselect top "segname R and chain R and resid 296 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:S151
set sele [ atomselect top "segname R and chain R and resid 151 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:C23
set sele [ atomselect top "segname R and chain R and resid 23 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:A279
set sele [ atomselect top "segname R and chain R and resid 279 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:S204
set sele [ atomselect top "segname R and chain R and resid 204 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:V106
set sele [ atomselect top "segname R and chain R and resid 106 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:V150
set sele [ atomselect top "segname R and chain R and resid 150 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:V182
set sele [ atomselect top "segname R and chain R and resid 182 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:P133
set sele [ atomselect top "segname R and chain R and resid 133 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_8
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:K147
set sele [ atomselect top "segname R and chain R and resid 147 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:F27
set sele [ atomselect top "segname R and chain R and resid 27 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_3
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:G24
set sele [ atomselect top "segname R and chain R and resid 24 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_2
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:S34
set sele [ atomselect top "segname R and chain R and resid 34 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:I45
set sele [ atomselect top "segname R and chain R and resid 45 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:I49
set sele [ atomselect top "segname R and chain R and resid 49 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:L158
set sele [ atomselect top "segname R and chain R and resid 158 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:T226
set sele [ atomselect top "segname R and chain R and resid 226 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:I288
set sele [ atomselect top "segname R and chain R and resid 288 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:I269
set sele [ atomselect top "segname R and chain R and resid 269 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:K225
set sele [ atomselect top "segname R and chain R and resid 225 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:E172
set sele [ atomselect top "segname R and chain R and resid 172 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_4
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:Q53
set sele [ atomselect top "segname R and chain R and resid 53 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_5
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:A71
set sele [ atomselect top "segname R and chain R and resid 71 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_6
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

# node: R:R:Q59
set sele [ atomselect top "segname R and chain R and resid 59 and name CA" ]
lassign [$sele get {x y z}] pos
draw color $color_consurf_7
graphics top sphere $pos radius $node_size_value_from_10_to_20 resolution 60

